StructureScan Mini XT
Tool Designed for Today’s Professional Concrete Scanner

The StructureScan Mini XT is the tool built to handle all your job site and survey needs. This rugged system is designed with an integrated display for single operator data collection and interpretation. Reduce safety risks, financial exposure, costly delays and provide the full-range of services to your customers by adding this concrete scanner to your toolbox.

The Mini XT is ideal for concrete inspection and evaluation. Easily and accurately locate the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, pan decking, voids and service utilities.

The StructureScan Mini XT is typically used to:

  • Find rebar, post tension, conduits, and non-metallic objects
  • Measure slab thickness and void location
  • Concrete scanning and imaging
  • Condition assessment
  • Structure inspection

System includes;

  • StructureScan Mini XT with 3D software
  • Lithium-ion battery (2)
  • Dual bay battery charger
  • Rugged transit case
  • Quick Start Guide
  • 2-year warranty

The Professional Scanner’s Choice
The StructureScan Mini XT is the right tool to conquer all your job site needs.

High Frequency, High Resolution Concrete Antenna

The StructureScan Mini XT employs a 2.7 GHz antenna that provides excellent near surface resolution while also maintaining the ability to resolve deeper targets.

Enhanced Target Visualization

The StructureScan Mini XT provides multiple modes for data collection and interpretation:

  • Scan EZ: With the press of just one button, this mode provides the ideal amount of information with 2D data views for efficient mark-and-go survey
  • Scan Max: Focus mode is designed to simplify the data to better highlight embedments, locate voids and see closely spaced targets
  • Scan 3D: 3D visualization is often used in complicated structural scenarios where the survey area may contain multiple levels of targets. This mode helps the user visualize congested areas and non-linear targets

Increase Job Site Efficiency with Mini XT Kit

Today’s professional scanners need a variety of tools to conquer all job site obstacles. For large survey areas the extension pole allows for better ergonomics and ease of use. Using the Mini XT harness and Palm XT antenna together allows the user to collect data with one-hand operation ensuring you maintain 3 points of contact to comply with OSHA regulations.

Data Examples

Identify Structural Features

Data was collected with the Mini XT on a large concrete wall of a flood control system. Data shows multiple layers of rebar. Long flat reflector (green line) is due to the system running on top of the longitudinal rebar. Blue box indicates the back side of wall



Detecting Bottom of Slab

Data was collected using Mini XT with the Palm XT antenna and shows wire mesh (red dots) with 15 cm (6 in) spacing over pandecking (blue line).
Mini XT: Enhanced Visualization with Cross Polarization
Enhanced Visualization: Cross Polarization


Enhanced Visualization: Cross Polarization

The two sections of data below were collected with Mini XT and Palm XT antenna over the same area and in the same direction. Data shows a top layer of heavy wire mesh with multiple cascading plastic and steel targets.


Enhanced Visualization: Focus Mode

Data collected with Mini XT and Palm XT antenna showing multiple layers of structural steel. Focus mode function allows user to simultaneously view raw and focus data using the slider bar.



3D Data with Virtual Borehole Feature

3D data set collected with Mini XT and Palm XT antenna showing structural support within a wall in a parking garage. This data is visible on the Mini XT screen after the 3D grid has been compiled. The size of the Borehole feature is user-selectable after the grid is complete.



  • Display 6.5” Touchscreen LED
  • Environmental Rating IP65
  • Display Modes Linescan, Focus and 3D
  • Available Ports USB
  • Languages English, French, Japanese and Chinese
  • Operating Temperature -4°F to 104°F (-20°C to 40°C)


Palm XT Antenna

Palm XT gives users the ability to scan tightly spaced areas and between obstacles. The survey wheel orientation can quickly be rotated between three positions for increased survey flexibility. This feature also makes it simple to switch between standard and cross polarized data collection.

  • Cross Polarization scanning can reduce the top layer of mesh from view and assist with material discrimination
  • Full keypad control via the antenna top provides remote control of the user interface

LineTrac XT: LineTrac XT adds the ability to detect AC power present in conduits. This accessory detects low amplitude AC signals associated with difficult to locate conduits.

  • Seamless fusion with GPR data
  • Aids in target discrimination
  • Detection at 50/60 Hz
  • Rugged, IP-65 rated enclosure

StructureScan Mini XT Carry Harness

The StructureScan Mini XT harness is designed for applications where the user requires the use of both hands during a survey.


Extension Pole

The extension pole for the StructureScan Mini XT and Mini LXT has a six-button remote operation to allow for easier scanning on walls and floors.





By admin

Leave a Reply

Your email address will not be published. Required fields are marked *